Shed Side Gable 1.5 x 2.3 Single Sliding Side Door

Sheds4less
9346116022002
Add to cart
  • Description

Shed Side Gable 1.5 x 2.3 Single Sliding Side Door

This is a 1.5 x 2.3 side gable garden shed. Side gable garden sheds do not have any doors on the sides facing the gable. This shed has a single sliding door in the non-gable facing wall. This maximises internal storage space, while giving good access. As this shed has a sliding door you don’t need the swing space required for hinged doors. This saves space for paths or when you are close to a fence. It is also ideal to position under the carport, next to the car. You never have to worry about the shed door dinging the car.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.


 Pre-drilled holesPre-drilled holes

 DA friendlyCouncil DA friendly

 Easy to assembleEasy to assemble

 Every part labelledEvery part labeled

 Australian instructionsAustralian instruction manual

 Fast deliveryFast delivery
ModelG15N023S1
Roof typeSide Gable Roof
Exterior dimension1510mm x 2250mm
Interior dimension1440mm x 2210mm
Height @ wall1900mm
Height @ ridge2300mm
Primary door typeNil
Primary door heightN/A
Primary door openingN/A
Secondary door typeSingle sliding
Secondary door height1870mm
Secondary door opening770mm
Area3.40sq mt
Slab size1710mm x 2450mm x 100mm

Garden shed floor plan

Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

Inferior single wheel bracket

Inferior – single wheel bracket 2 per door bottom mounted only.

Inferior plastic glide

Inferior – single plastic peg glide 2 per door top mounted only.

Superior 4-wheel bogie

Superior – 4 wheel bogie - 2 top + 2 bottom - 16 wheels per door.


Gable Roof Shed Features


About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.


Buy your garden shed here.