Garden Shed 3.0 x 0.8 Single Sliding Door + Single Hinged Door
Sheds4less
9346116014700
Add to cart
  • Description

Garden Shed 3.0 x 0.8 Single Sliding Door + Single Hinged Door

This is a pretty versatile narrow shed. At less than a metre deep it is ideal for putting up against the side of the house. As it has a single sliding door on the 3 metre side you do not need extras space to swing a traditional hinged door.

This garden shed has the added convenience of an additional hinged door that can be installed on either end. You can use this for additional access, or shelve it out for a handy outdoor cupboard. As this shed has a sliding door you don’t need the swing space required for hinged doors. This saves space for paths or when you are close to a fence. It is also ideal to position under the carport, next to the car. You never have to worry about the shed door dinging the car.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.


 Pre-drilled holesPre-drilled holes
 DA friendlyCouncil DA friendly
 Easy to assembleEasy to assemble

 Every part labelledEvery part labeled
 Australian instructionsAustralian instruction manual
 Fast deliveryFast delivery

Shed Specifications

Model G30S108H1
Roof type Front Gable Roof
Exterior dimension 2995mm x 775mm
Interior dimension 2955mm x 735mm
Height @ wall 1900mm
Height @ ridge 2300mm
Primary door type Single sliding
Primary door height 1870mm
Primary door opening 770mm
Secondary door type Single hinged
Secondary door height 1845mm
Secondary door opening 720mm
Weight 86.60kg
Area 2.32 sq mt
Slab size 3195mm x 975mm x 100mm

Garden shed floor plan

Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

Inferior single wheel bracket

Inferior – single wheel bracket 2 per door bottom mounted only.

Inferior plastic glide

Inferior – single plastic peg glide 2 per door top mounted only.

Superior 4-wheel bogie

Superior – 4 wheel bogie - 2 top + 2 bottom - 16 wheels per door.


Gable Roof Shed Features


About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.


Buy your garden shed here.

 

Related Products

3.0 x 0.8 Single Hinged Door + Single Hinged Door
More details