Garden Shed Gable 1.5 x 1.5 Single Sliding Door + Single Sliding Door

Sheds4less
9346116015646
Add to cart
  • Description

Garden Shed Gable 1.5 x 1.5 Single Sliding Door + Single Sliding Door

This is an ideal shed for the smaller back yard. It comes with two sliding doors in separate walls. You do not have to allow swing space for sliding doors so you shed can go into a pretty tight space. As the shed is square, you can choose to put the doors in either adjacent or opposite walls. When doors are in adjacent walls this is ideal for a corner position, when they are in opposite walls you can get access from both sides. Ideal for when the shed is located down the side of the house.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.


 Pre-drilled holesPre-drilled holes

 DA friendlyCouncil DA friendly

 Easy to assembleEasy to assemble

 Every part labelledEvery part labeled

 Australian instructionsAustralian instruction manual

 Fast deliveryFast delivery

Shed Specifications

Model G15S115S1
Roof type Front Gable Roof
Exterior dimension 1510mm x 1510mm
Interior dimension 1470mm x 1470mm
Height @ wall 1900mm
Height @ ridge 2300mm
Primary door type Single sliding
Primary door height 1870mm
Primary door opening 770mm
Secondary door type Single sliding
Secondary door height 1870mm
Secondary door opening 770mm
Weight 69.70kg
Area 2.28 sq mt
Slab size 1710mm x 1710mm x 100mm

Garden shed floor plan

Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

Inferior single wheel bracket

Inferior – single wheel bracket 2 per door bottom mounted only.

Inferior plastic glide

Inferior – single plastic peg glide 2 per door top mounted only.

Superior 4-wheel bogie

Superior – 4 wheel bogie - 2 top + 2 bottom - 16 wheels per door.


Gable Roof Shed Features


About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.


Buy your garden shed here.

 

Related Products