Garden Shed 3.0 x 1.5 Single Hinged Door + Single Sliding Door

If you are tight for space but still need to store a ton of stuff this shed might be your answer. At only 1.5mt deep this shed will still fit down the side of most modern homes. It has a 770mm wide single hinged door on the 3mt side plus it has a sliding door that can be installed on either end. The sliding end door means you do not have to allow for extra swing space.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.

Pre-drilled holes	Council DA friendly	Easy to assemble
Every part labeled	Australian instruction manual	Fast delivery

About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© and our Sandrift Cream is equivalent to a Colorbond color called Paperbark© These are probably the most common greens and creams used architecturally today.