Garden Shed 3.0 x 3.0 Single Sliding Door No Side Door

Sheds4less
9346116014816
Add to cart
  • Description

Garden Shed 3.0 x 3.0 Single Sliding Door No Side Door

This is your typical 3 x 3 garden shed with a couple of twists. The front gable design means that it will not look out of place in modern homes, and instead of the traditional hinged door, this little beauty comes with a single sliding door. This means you do not have to allow swinging space for a traditional hinged door.

We use light industrial tracks on all our sliding door sheds. This sliding door system is superior to the plastic glide system that is commonly used in garden sheds.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.


 Pre-drilled holesPre-drilled holes

 DA friendlyCouncil DA friendly

 Easy to assembleEasy to assemble

 Every part labelledEvery part labeled

 Australian instructionsAustralian instruction manual

 Fast deliveryFast delivery

Shed Specifications

Model G30S130N0
Roof type Front Gable Roof
Exterior dimension 2995mm x 2995mm
Interior dimension 2955mm x 2955mm
Height @ wall 1900mm
Height @ ridge 2300mm
Primary door type Single sliding
Primary door height 1870mm
Primary door opening 770mm
Secondary door type Nil
Secondary door height N/A
Secondary door opening N/A
Weight 128.30kg
Area 8.97 sq mt
Slab size 3195mm x 3195mm x 100mm

Garden shed floor plan

Think All Sheds Are the Same?
Think Again!

Our sheds have more features and benefits than the rest. Find out more.


Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

Inferior single wheel bracket

Inferior – single wheel bracket 2 per door bottom mounted only.

Inferior plastic glide

Inferior – single plastic peg glide 2 per door top mounted only.

Superior 4-wheel bogie

Superior – 4 wheel bogie - 2 top + 2 bottom - 16 wheels per door.



About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.


Buy your garden shed here.