Garden Shed 3.0 x 3.0 Double Sliding Door + Single Sliding Door

This shed comes with a set of double sliding doors, plus an additional single sliding door. As the shed is square you can install the doors on either the opposite or adjacent walls. If you install on adjacent walls this is great for corner situations. You can even put a freestanding shelf unit behind the single slider to create storage space that is accessible from both inside and outside the shed. Install the doors on opposite walls and you create a "walk through" design which is great to put beside the house, giving you access from both the back and front yards.

We use light industrial tracks on all our sliding door sheds. This sliding door system is superior to the plastic glide system that is commonly used in garden sheds.

Pre-drilled holes	Council DA friendly	Easy to assemble
Every part labeled	Australian instruction manual	Fast delivery

Shed Specifications

Model	G30S230S1
Roof type	Front Gable Roof
Exterior dimension	2995mm x 2995mm
Interior dimension	2955mm x 2955mm
Height @ wall	1900mm
Height @ ridge	2300mm
Primary door type	Double sliding
Primary door height	1870mm
Primary door opening	1540mm
Secondary door type	Single sliding
Secondary door height	1870mm
Secondary door opening	770mm
Weight	136.80kg
Area	8.97 sq mt
Slab size	3195mm x 3195mm x 100mm

Think All Sheds Are the Same?
Think Again!

Our sheds have more features and benefits than the rest. Find out more.

Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.