Garden Shed 3.0 x 2.3 Double Hinged Doors + Single Sliding Door

Sheds4less
9346116014625
Add to cart
  • Description

Garden Shed 3.0 x 2.3 Double Hinged Doors + Single Sliding Door

Need a shed for the back corner of the yard? Well this might be what you need. The 3.0x2.3 shed size is great for modern back yards, you know the ones that are not a quarter acre block. This is a twist on this popular design, as well as double doors on the 3 metre side, this little baby has a single sliding door on the 2.3 metre side as well. This can be used for extra access or place a freestanding shelf unit behind it and you have a storage cupboard accessible from outside the shed.

Most garden sheds have either 1700mm or 1800mm walls and the gable roof peak at just on 2 metres. This is just a bit low for the average Australian. Our wall height is 1900mm and we put a steeper pitch on our gable to give you a full 2.3 metre gable peak. This little bit extra height makes a real difference.


 Pre-drilled holesPre-drilled holes

 DA friendlyCouncil DA friendly

 Easy to assembleEasy to assemble

 Every part labelledEvery part labeled

 Australian instructionsAustralian instruction manual

 Fast deliveryFast delivery

Shed Specifications

Model G30H223S1
Roof type Front Gable Roof
Exterior dimension 2995mm x 2250mm
Interior dimension 2955mm x 2210mm
Height @ wall 1900mm
Height @ ridge 2300mm
Primary door type Double hinged
Primary door height 1845mm
Primary door opening 1540mm
Secondary door type Single sliding
Secondary door height 1870mm
Secondary door opening 770mm
Weight 126.10kg
Area 6.74 sq mt
Slab size 3195mm x 2450mm x 100mm

Garden shed floor plan

Think All Sheds Are the Same?
Think Again!

Our sheds have more features and benefits than the rest. Find out more.


Light Industrial Door Tracks

We use light industrial tracks on all our sliding door sheds. Each door has 16 rollers, 8 top and 8 bottom, that roll in a “C” section channel. This sliding door system is superior to the plastic glide or single wheel systems that are commonly used in garden sheds.

Inferior single wheel bracket

Inferior – single wheel bracket 2 per door bottom mounted only.

Inferior plastic glide

Inferior – single plastic peg glide 2 per door top mounted only.

Superior 4-wheel bogie

Superior – 4 wheel bogie - 2 top + 2 bottom - 16 wheels per door.



About our steel

We use hot dipped galvanized steel in our garden sheds that is tested to an International Standard ASTM-A653, it is either standard galvanized or galvanized then coated with a polyester color coating.

The coated steel is tested to a further International Standard ASTM-A755M. Every batch of steel we buy is independently tested to ensure it meets these standards.

Over the years we have learned that 0.32 thick steel provides the best performance/value ratio for garden sheds. So, this is the steel we use for our full range of sheds.

We are happy to offer a 30-year warranty on our garden sheds, as we know we use quality steel. If you want to read more about International Standard ASTM-A653 click here.

A lot of people ask do you use Colorbond© Steel? Colorbond is a trademark of Bluescope Steel for their coated steel. We do not use Colorbond steel in our sheds.

However, our Midland Green color is equivalent to a Colorbond color called Pale Eucalypt© Sandrift Cream is equivalent to a Colorbond color called Paperbark© and our Onyx Grey is equivalent to a Colorbond color called Monument© These are probably the most common steel colors used architecturally today.


Buy your garden shed here.

 

Related Products